The most simple and effective solution to charge and mount your Nokia phone in your vehicle. The phone slots in securely from the top of the holder and on to the connector, which connects via curly cable to the cigarette lighter plug.
Select your Nokia model and Mount type from the drop down menus above.
Gooseneck – A Gooseneck suction cup to stick to your windscreen.
Horizontal Surface – A no-mark industrial grade strength tape mount, designed and manufactured by us, to stick to any Horizontal surface in your vehicle. All you need is 45x38mm of space. The most common place is on top of the dashboard.
Vertical Surface – A no-mark industrial grade strength tape mount, designed and manufactured by us, to stick to any vertical surface in your vehicle. All you need is 45x38mm of space. The most common place is the console next to the steering wheel.
- The tape mount can be bent to fit curved surfaces. And all mounts are designed to swivel to your desired viewing angle.
- Our holder also fits bumpers. The “wings” can be loosened with a screwdriver to accommodate the additional width of the bumper/skin.
- The holders can be removed if you want to transfer them to different cars, or swap the holder to fit a different phone. Horizontal and Vertical mounts are also available separately for this reason.
- The cable can be replaced, or adjusted to fit with more rugged bumpers. A good tip when replacing is to put the phone in the empty holder, put the cable through connector hole until it charges your phone, and then tighten the screw securely.
A simple design that is fully customisable to suit all of your mounting needs.
The video below demonstrates the installation of the Vertical Mount charger for iPhone 4S.